|
$25.00
Minimum Evaluation Charge On Un-Repaired Gages
Please contact us for
pricing information.
|
Gage Blocks |
English
Gage Blocks
English Grade (2) and Below
English Grade (1) and Ceramic
|
Metric Gage
Blocks
Metric Grade (2) and Below
Metric Grade (1) and Ceramic |
Thin and
Non-Standard Gage Blocks
English Grade (2) and Below
English Grade (2) and Ceramic |
Long Gage
Blocks 5"- 20" |
|
As Found - As Left readings (Only When
Required By Customer) |
|
Gage Pins |
|
Gage Pins
(Long Form Certification) - .011" -
1.000" (+/- .0002" Tolerance) "X"
Class Gage Pins |
|
Plain
Plugs and Diameters |
Plain Ring
Gages |
|
.0004" -
2.0000" |
.040 -
.1250" |
|
2.0001" -
4.000" |
.125 -
2.000" |
|
4.0001" -
8.000" |
2.001 -
5.500" |
| |
5.500 -
11.000" |
|
Class
"Z" .010" - 2.000" |
|
Thread Gages - (Call, Fax, or Email
Gages To Be Quoted) |
|
Bore Gages |
| Does
Not Include Ring Gage Certification -
See Ring Gages |
|
Dial / Electric Calipers |
| 4 -6" |
| 8" |
| 12" |
| 24" |
| 40" |
|
Standard / Digital / Mechanical or
Electronic Micrometers
|
| 0 - 6" |
| 7 -
12" |
| Depth
Micrometer Rods |
|
Micrometer Standards |
Specialty Micrometers |
|
0 - 6" |
0 -6" |
|
7 -12" |
7 -
12" |
| |
Anvil
or Rods |
|
Dial Indicators |
Test
Indicators |
|
Electrical
Indicators |
Angle Plates |
| |
Up to
4" |
| |
4 - 6" |
| |
6 - 8" |
| |
8 -
10" |
| |
10 -
12" |
| |
12 -
20" |
|
Parallels |
| Up to
12" |
| 13 -
20" |
| 20 -
40" |
|
Bars |
Thread Wires |
| 5" |
Thread
Wire Pitch Set |
| 10" |
Gear
Wire Pitch Set |
| 20" |
|
| Invar Bars |
|
|
Spheres
and Gage Balls |
Height Gages |
|
Precision
Gage Ball |
|
|
Sphericity
Reading |
|
|
1" Datum
Sphere |
|
|
2" Datum
Sphere |
|
|
Torque
Wrenches |
Squares |
|
250 Ft-Lbs
- 1000 In-Lbs |
Up to
6" |
|
Repairs
Not Included |
6 -
12" |
|
(Subject
to Evaluation Charge) |
12 -
24" |
|
Sheffield
Comparators |
Federal Snap Gage |
|
Repairs
and Certify |
|
|
Surface
Plates - Quote |
Hardness Testers - Quote |
|
Grade AA,A
or B Regular, Superficial
Certification and/ or Resurfacing
(as needed)
|
Regular,
Superficial |
New Gage Blocks, Gage
Pins and Hand Tools are also available.
If certification is also
needed, please specify prior to certification.
All missing and/or out
of tolerance equipment will be quoted. Products
not listed can be quoted on an individual basis.
|
